Tap Switch: controls rate in Tap Mode.(Hold down for 3 seconds to enable Ping Pong between OUTA and OUTB)
Rate: Normal Mode - regular Rate pot, Tap Mode-Multiply by 1,2,3 or 4 beats per Tap
On/Off: True Bypass Channel A, Buffered Output Channel B Normal-Tap mode Switch
Warmth: Biases 2 different analog optical devices for vintage tube sound, aggressive tremolo, or any blend & flavor in
VolumeB, VolumeA: adjust output levels (cut to boost)
Shape: adjusts the on/off duty cycle and shape of the tremolo
Expression input: Use an external expression pedal to control the Rate
9VDC: operates from 9vdc source, polarity does not matter!
InA, OUTA, True Bypass
InB, OUTB Buffered Output
Warmth Pot: A first ever Warmth pot allows the user to dial in Vintage tube sounding tremolo to modern edgy tremolo, or any
blend of the two sounds. This is achieved by biasing 2 different sounding analog optical-couplers via the Warmth pot.
Shape Pot: The Shape pot adjusts the off/on duty cycle and shape of the tremolo. The musician can achieve numerous
tremolo flavors from vintage sounds to playing backwards reminiscent of old Jimi sounds.
Tap/Normal Switch: Used to select Tap Tempo or Normal Rate pot modes.
Tap Tempo: Push and release the Tap Tempo switch at least 2 times to set the tempo of the tremolos. When in Tap Tempo
mode, the Rate pot is used to multiply the tempo at 1:1, 1:2, 1:3 or 1:4 beats per tap.
Tap Tempo Memory: Tap Tempo is stored in memory until the tempo is changed (even when power is removed)
Rate Pot: Used as a traditional rate control during Normal mode. Used as tempo multiplier in Tap Tempo mode.
Inputs/Outputs: Independent channels for Mono in/out, Stereo in/out, or Mono in/stereo out.
Volume A & Volume B: Independently controls volumes for OUTA (channel A) and OUTB (channel B)
Ping Pong/Sync Mode: On the fly switching between Ping Pong or Sync modes, Ping Pong mode (back and forth between
stereo outputs) or Sync mode (Both outputs in sync). To change back and forth, simply hold down the Tap Tempo switch for 3
On/Off: Channel A is True Bypass, while Channel B is buffered output.
Expression Pedal: Control the Tremolo rate with an external Expression pedal (while in Normal Mode).
Internal Waveform: An internal wave form jumper can be set for triangle (warmest), sign, or a custom waveform.
Tremolo beat: The “on” instrument sound is used when the beat is set (verses absence of sound)